在隔熱斷橋鋁型材制造中，開齒機用于在鋁型材槽口內滾齒穿條，是提高隔熱條和鋁合金組合型材剪切力的關鍵設備。下面由有十多年的機器研發經驗的濟南歌德瑞斯機械設備為您帶來開齒機的相關知識。

In the manufacturing of thermal insulation broken bridge aluminum profiles, the gear cutting machine is used to roll and thread teeth in the groove of the aluminum profile, which is a key equipment for improving the shear force of the thermal insulation strip and aluminum alloy composite profile. Below, Jinan Gede Ruisi Mechanical Equipment, with over ten years of experience in machine research and development, will bring you relevant knowledge of gear cutting machines.

　　開齒機的正確操作流程：

The correct operation process of the gear opening machine:

　　開齒機是一種常用于木材、竹材、草料、稻草等物料開齒的機械設備，使用前需認真了解其操作步驟。具體操作步驟如下：

Gear cutting machine is a mechanical equipment commonly used for gear cutting of materials such as wood, bamboo, grass, and rice straw. Before use, it is necessary to carefully understand its operating steps. The specific operation steps are as follows:

　　1.首先檢查開齒機的各部位是否運轉正常，無雜質、無變形，電線是否正常。

Firstly, check whether all parts of the gear cutting machine are operating normally, without impurities or deformation, and whether the wires are normal.

　　2.接通電源，按壓?jiǎn)?dòng)按鈕，待轉子運轉正常后再投料。

2. Connect the power supply, press the start button, and wait for the rotor to run normally before feeding.

　　3.投料前，需要將要處理的物料切成適當長度，使其能夠順利通過開齒機的縫隙，注意不要過長過短。

Before feeding, the material to be processed needs to be cut into appropriate lengths so that it can smoothly pass through the gaps of the toothed machine, and be careful not to be too long or too short.

　　4.投料時，需要保持適當速度，避免過快或加量過大，否則可能會導致設備堵塞。

4. When feeding, it is necessary to maintain an appropriate speed to avoid being too fast or adding too much, otherwise it may cause equipment blockage.

　　5.開齒過程中需要時常檢查磨損程度，保持設備良好狀態。

During the gear opening process, it is necessary to regularly check the degree of wear and maintain the equipment in good condition.

以上就是有關：AB面雙頭開齒機 的介紹，想了解更多的內容請點擊：http://m.bzqtzb.cn 我們將會全心全意為您提供滿分服務，歡迎您的來電！

The above is an introduction to the AB face double head gear opening machine. To learn more, please click: http://m.bzqtzb.cn We will wholeheartedly provide you with full score service. Welcome to call us!